interpolate

[weeo]

Hi, I,m running cakewalk pro audio 9 and have a problem with A file .The drums wont play.
When I go to the event list ( on track 10 ), the drums all have 0 on the list. (at the right hand side )
I can change all the 0 to 1 and the drums play ok. But it takes forever to change them all.
I think there is a command in the Interpolate section that does this but for the life of me I can't suss it out.
Does anyone know how I do this ?
I'd appreciate any help, thanks

Regards
Eddie

[frankie]

Highlight Track...View..... Piano Roll screen.....control ......Track Volume....channel.... 10.....Use graph

[weeo]

Hi Frank, thanks for your time. Where do I find the Graph ?

Thanks
Eddie

[frankie]

Bottom piano roll screen,use the pencil top LH corner,and eraser if you cock it up.Or If you put the volume faders up it increases the whole tracks volume.

[weeo]

I found the graph, selected pencil, moved the wave shape to the end of song. Nothing happened. The Zero's at the right hand side of the event list are still there. I'm missing something . I'm looking at the manual to see if there's a step by step idiot guide, but can't find anything so far. Appreciate your help, Frank.

[Sequenzzer]

Here's what I do Eddie...

Highlight the track 10 by clicking on the track number so that it's a solid color then...

Rewind to beginning of track
Go into "event" list
Press "F9" to highlight and select the very first drum beat of the track...This sets your "from" marker
Hold down "Control" and press "f10"...this will set the "end" marker

then select the "edit--interpolate" command...The first screen that comes up should say "event filter search"...everything should be selected on the "include" already but just in case it's not,hit the button that says "all"

Hit the "ok" button

Another screen will pop up,this is the "event filter replace"...Now on this screen you will go to the very first line..You will see:

Note then a Min and Max box. Velocity then a Min and Max Box. Duration then a Min And Max box...You are going to change the "duration" min and max box..Simply change the "Min" box to an amount other than "0" and make sure you change the "max" box amount to the same amount you chose for the "min" box.

Hit "ok"

You should see all notes duration on that track set to the amount you selected in the min and max boxes.

Hope this helped!

Take Care

Mike

[weeo]

Got it Mike , a perfect "Idiotproof" Guide .
Thanks to you and Frank for your input it's much appreciated .

Regards
Eddie